Creating Zipper Puller

Violet
Edited

 

Zipper Structure

mceclip0.png

Puller

※ Please check the requirements and recommendations for the Puller below.

 

[Required]

  • The puller(zipper) file format must be *ZPL or *ZPU.
  • Only files in OBJ format are supported for registration as a Puller, and the OBJ should only contain the Puller Mesh.
  • When registering the zipper file, it will be all created in size #3 (100%). Please create the Puller file(OBJ) in size #3.
  • The mesh’s normal direction must be facing outwards.
  • Place the puller on the slider to the origin (0,0,0).
  • In the Description, the following product information must be provided.
    (1) Vertex Counts
    (2) UV MAP unwrapping status

 

[Recommended]

  • If the mesh and the normal map share the same position and direction, it may lead to overlapping and flickering issues during rendering. Make sure to avoid overlapping the mesh.
  • If two or more vertices are located in the same place, please weld them together.
  • For the complex graphic pattern, please use the Normal map. (e.g. logo, pattern, etc.)
  • It is recommended to use textures with a maximum size of 1024 pixels.
  • The scanned OBJ is compatible, but the mesh should be re-meshed and editable.
  • It is recommended to add an edge loop(s) to define the sharp edge.
  • you can't apply multiple materials to a puller but can render various materials using textures. Therefore, it's essential to have UV unwrapping done in a way that textures can be created without overlapping.

 

Puller.jpg

<Puller Mesh's Position on the Grid>



 

1. Puller Registration

1. Open CLO S/W

2. Register OBJ from the Main Menu > Material > Zipper > Register OBJ

 

puller_registration.png

 

▶Basic

  • Type : Puller
  • Name : Enter the name of the file to be created.
  • Scale : Select the same scale unit when creating the OBJ.
  • Axis Convention : Set up the axis so the Zipper can be positioned properly.

▶File

  • OBJ : Import the OBJ file to be registered.

▶Preview : Check the imported Puller file in advance.

▶OK/Cancel : Click OK to finish the file creation when the file registration is done.

The created file is saved in each object folder as Assets > Materials > Hardware_and_Trims > Zipper. 

 

 

 

 

2. CONNECT UPLOAD - Entering Asset Description

When uploading the ZPL to CONNECT, please provide detailed information about the asset for the convenience of customers.

If detailed information is missing, asset registration may be rejected during the item approval process.

 

 

1. UPLOAD (Mandatory)

Confirm the uploaded asset name and format and replace the file by pressing the REUPLOAD button if necessary.

 

2. TITLE (Mandatory)

Please enter the asset name that will be displayed on CONNECT.

By default, the uploaded asset's name will be set automatically as the DEFAULT TITLE.

 

3. DESCRIPTION

Please provide the default size of the ZPL that you created for customers.

Please provide the ZPL information referencing the Property Editor in CLO / Marvelous Designer.

  • Gauge
  • %
  • Weight (g)

 

4. TAGS 

'TAGS' is a target keyword that helps customers search and amplify your content's reach. Entering the type of assets for sale will help customers when searching for the items.

 

5. ATTACHMENT

You can attach files relating to the ZPL. However, it is impossible to track attachment files attached to 'ATTACHMENT' are being used.

 

6. ADD SUB-IMAGES

You can additionally add images that highlight the characteristics of the ZPL.

 

7. THUMBNAIL

Register an image that well showcases the characteristics of the ZPL.

If you applied a material that is visible only in the render, please register the rendered image.

Registering the images where items are not visible or images unrelated to the item may lead to rejection during the item approval process.