Creating Zipper Sider&Puller

Zipper Structure

Slider & Puller

※ Please check the requirements and recommendations for the Slider and puller below.

[Required]

• The slider & puller(zipper) file format must be *.ZSS
• Slider & puller should be created in OBJ file format.
• The Slider & Puller OBJ file must consist of two or more meshes.
• When registering the zipper file, it will be all created in size #3 (100%). Please create the Slider & Puller file(OBJ) in size #3.
• The mesh’s normal direction must be facing outwards.
• Align the MESH position according to the purpose of each axis. (Same as the axis of the Slider)

• In the Description, the following product information must be provided.
  (1) Vertex Counts
  (2) UV MAP unwrapping status

[Recommended]

• In the 'Select Mesh' section of the Register OBJ, please assign the name of the Slider Mesh as 'Slider' and the Puller Mesh as 'Puller' so that they are automatically recognized from the OBJ file.

• If the mesh and the normal map share the same position and direction, it may lead to overlapping and flickering issues during rendering. Make sure to avoid overlapping the mesh.
• If two or more vertices are located in the same place, please weld them together.
• For the complex graphic pattern, please use the Normal map. (e.g. logo, pattern, etc.)
• The scanned OBJ is compatible, but the mesh should be re-meshed and editable.
• It is recommended to add an edge loop(s) to define the sharp edge.

<Slider & Puller Mesh's Position on the Grid>

1. Slider & Puller Registration

1. Open CLO S/W
2. Register OBJ from the Main Menu > Material > Zipper > Register OBJ

▶Basic

• Type : Slider & Puller
• Name : Enter the name of the file to be created.
• Scale : Select the same scale unit when creating the OBJ.
• Axis Convention : Set up the axis so the Zipper can be positioned properly.

▶File

• OBJ : Import the OBJ file to register as Slider & Puller
• Select Mesh : Select the mesh corresponding to Slider & Puller from the OBJ file.
  *If the Mesh names in the OBJ file are Slider/Puller, they can be automatically recognized as Slider & Puller.

▶Preview : Check the imported Slider & Puller file in advance.

• Puller Position : Adjust the slider to place the right position where the puller is located on the slider.

▶OK/Cancel : Click OK to finish the file creation when the file registration is done.

The created file is saved in each object folder as Assets > Materials > Hardware_and_Trims > Zipper. 

2. CONNECT UPLOAD - Entering Asset Description

When uploading the ZSS to CONNECT, please provide detailed information about the asset for the convenience of customers.

If detailed information is missing, asset registration may be rejected during the item approval process.

1. UPLOAD (Mandatory)

Confirm the uploaded asset name and format and replace the file by pressing the REUPLOAD button if necessary.

2. TITLE (Mandatory)

Please enter the asset name that will be displayed on CONNECT.

By default, the uploaded asset's name will be set automatically as the DEFAULT TITLE.

3. DESCRIPTION

Please provide the default size of the ZSS that you created for customers.

Please provide the ZSS information referencing the Property Editor in CLO / Marvelous Designer.

• Gauge
• %
• Weight (g)

4. TAGS 

'TAGS' is a target keyword that helps customers search and amplify your content's reach. Entering the type of assets for sale will help customers when searching for the items.

5. ATTACHMENT

You can attach files relating to the ZSS. However, it is impossible to track attachment files attached to 'ATTACHMENT' are being used.

6. ADD SUB-IMAGES

You can additionally add images that highlight the characteristics of the ZSS.

7. THUMBNAIL

Register an image that well showcases the characteristics of the ZSS.

If you applied a material that is visible only in the render, please register the rendered image.

Registering the images where items are not visible or images unrelated to the item may lead to rejection during the item approval process.