Zipper Structure
Top Stopper
※ Please check the requirements and recommendations for the top stopper below.
[Required]
- The Top Stopper(zipper) file format must be *ZSP or *ZST.
- Only files in OBJ format are supported for registration as Top Stoppers and a total of two OBJ files are required.
- The OBJ should only contain the Stopper Mesh.
- When registering the zipper file, it will be all created in size #3 (100%). Please create the stopper file(OBJ) in size #3.
- The mesh’s normal direction must be facing outwards.
- Align the MESH position according to the purpose of each axis.
|
X-axis |
Place the point where the zipper tape touches each stopper at the X-axis 0. |
|
Y-axis |
Top Stopper Position the point of the top stopper that aligns with the endpoint of the zipper tape at the Y-axis 0.
Position the point of the bottom stopper that aligns with the bottom of the slider at the Y-axis 0. |
|
Z-axis |
Place the slider's zipper tape faces at the Z-axis 0. |
- In the Description, the following product information must be provided.
(1) Vertex Counts
(2) UV MAP unwrapping status
[Recommended]
- If the mesh and the normal map share the same position and direction, it may lead to overlapping and flickering issues during rendering. Make sure to avoid overlapping the mesh.
- If two or more vertices are located in the same place, please weld them together.
- For the complex graphic pattern, please use the Normal map. (e.g. logo, pattern, etc.)
- The scanned OBJ is compatible, but the mesh should be re-meshed and editable.
- It is recommended to add an edge loop(s) to define the sharp edge.
- From the Front View, the Top Stopper should be placed on the (-) Y-axis area.
- From the Top View, the origin of the X-axis is where zipper teeth are closed. Therefore, the OBJ of each Top Stopper should be created slightly to stick out from the origin of the X-axis.
<Top stopper mesh's Position on the Grid>
1. Top Stopper Registration
1. Open CLO S/W
2. Register OBJ from the Main Menu > Material > Zipper > Register OBJ
▶Basic
- Type : Stopper / Top
- Name : Enter the name of the file to be created.
- Scale : Select the same scale unit when creating the OBJ.
-
Axis Conversion : Set the axis to ensure the Stopper's proper placement.
▶File
-
OBJ : Import the OBJ file to be registered.
- Place the Imported Stopper from the top of the two OBJs in the part where the zipper was first created.
▶Preview : Check the imported Stopper file in advance.
▶OK/Cancel : Click OK to finish the file creation when the file registration is done.
The created file is saved in each object folder as Assets > Materials > Hardware_and_Trims > Zipper.
2. CONNECT UPLOAD - Entering Asset Description
When uploading the ZSP to CONNECT, please provide detailed information about the asset for the convenience of customers.
If detailed information is missing, asset registration may be rejected during the item approval process.
1. UPLOAD (Mandatory)
Confirm the uploaded asset name and format and replace the file by pressing the REUPLOAD button if necessary.
2. TITLE (Mandatory)
Please enter the asset name that will be displayed on CONNECT.
By default, the uploaded asset's name will be set automatically as the DEFAULT TITLE.
3. DESCRIPTION
Please provide the default size of the ZSP that you created for customers.
Please provide the ZSP information referencing the Property Editor in CLO / Marvelous Designer.
- Gauge
- %
- Weight (g)
4. TAGS
'TAGS' is a target keyword that helps customers search and amplify your content's reach. Entering the type of assets for sale will help customers when searching for the items.
5. ATTACHMENT
You can attach files relating to the ZSP. However, it is impossible to track attachment files attached to 'ATTACHMENT' are being used.
6. ADD SUB-IMAGES
You can additionally add images that highlight the characteristics of the ZSP.
7. THUMBNAIL
Register an image that well showcases the characteristics of the ZSP.
If you applied a material that is visible only in the render, please register the rendered image.
Registering the images where items are not visible or images unrelated to the item may lead to rejection during the item approval process.